Regulatory trackerCoverage and methodology
All findings
Canada · British Columbia: WorkSafeBC jurisdictionFuture

British Columbia adds a combustible dust division from January 2027

British Columbia adds a combustible dust division to Part 6 of the OHS Regulation on January 4, 2027. Employers in WorkSafeBC jurisdiction who generate or handle dust will need to find out whether it is combustible and assess the combustion risk. Where that assessment finds a hazard, they will need a dust management program, worker training and specific controls.

Scope to keep in mind

The division sets program and housekeeping duties. It sets no airborne exposure limit and does not apply automatically to Mines Act workplaces.

Legal status
adopted not yet in force
Source check
Nov 11, 2026
Topic
Combustible dust

What changed

Previous requirement

Part 6 had no dedicated combustible dust division. Prior wording of the provisions amended as consequential changes was not compared here.

New requirement or current position

Employers who generate or handle dust must minimize combustion risks and determine whether the dust is combustible; dust is presumed ignitable and deflagrable unless a written determination with a qualified person shows otherwise (ss. 6.135, 6.137). For combustible dust they must prepare a written combustion risk assessment (s. 6.140). If it identifies a combustion hazard, they must run a combustible dust management program (s. 6.141), train exposed workers (s. 6.143) and apply the risk controls in ss. 6.147 to 6.159, including suspension control (s. 6.149), accumulation and cleaning, metal dust and bulk storage. Dust records are required (ss. 6.144, 6.145). Workplaces with no reasonably foreseeable risk from dust combustion, and dust in sealed commercial packages, are excluded (s. 6.134(2)). Consequential amendments affect ss. 4.17, 4.42 (compressed air), 5.71 and 31.5, and repeal s. 5.81.

Who it affects

  • Workplaces generating or handling combustible dust
  • Metal dust operations
  • Bulk storage of combustible particulate

Dates and milestones

Commencement and compliance dates can differ. Read the conditions beside each date, including any stay or local adoption requirement.

Announcement or publication
Not established or not applicable
Recorded effective date
Jan 4, 2027
Jan 4, 2027

Employers in WorkSafeBC jurisdiction where combustible dust is present

Part 6 combustible dust division, ss. 6.133 to 6.159, and the consequential amendments take effect.

What this could mean for your IH program

Advisory interpretation: Before January 4, 2027, identify combustible dusts on site, complete the combustion risk assessment and set up the management program, housekeeping and dust records the division requires.

Confirm applicability with a qualified practitioner before changing your program.

Questions and qualifications

  • This is a dust-hazard program duty. It sets no airborne exposure limit.
  • The same regulation (B.C. Reg. 229/2025) also updated respirator standard references from April 1, 2026; see CA-BC-FACESEAL-2026.
  • Section-level detail comes from the BC Laws not-in-force listing. The WorkSafeBC Board page does not name the regulation number or sections.
  • Do not apply WorkSafeBC requirements automatically to Mines Act workplaces.

Source evidence

  1. Occupational Health and Safety Regulation, B.C. Reg. 296/97

    BC Laws, King's Printer for British Columbia · Consolidated PDF, Amendments Not in Force, pp. 1 to 14 (PDF consolidation current to October 1, 2026): amended by B.C. Reg. 229/2025 effective January 4, 2027; Part 6 ss. 6.133 to 6.159; ss. 4.17, 4.42, 5.71, 5.81, 31.5

    Lists the combustible dust division and consequential amendments as amendments not yet in force, effective January 4, 2027.

  2. BOD Decision 2025/11/14-07: Amendments to the OHS Regulation and the Prevention Manual, Part 6, Combustible Dusts

    WorkSafeBC · Decision summary

    Board approved amendments on combustible dusts in Part 6 at its November 14, 2025 meeting; they come into effect January 4, 2027.

Managing your IH program

Explore how LEAP IH supports industrial hygiene data management and risk assessment.

Explore LEAP IH

See a missing update or a correction? Contact APT with this page and the official source.