British Columbia amends respirator face seal, fit test and seal check rules
British Columbia amended its respirator face seal, fit test and user seal check rules on November 6, 2026. The regulation now defines a tight-fitting respirator and says nothing may be permitted to interfere with the seal; earlier, standard references for respirators and safety headgear were updated on April 1, 2026.
The explicit clean-shaven sentence was removed. WorkSafeBC says the change adds no new requirements, and the rule still bars anything that interferes with the seal, which on a plain reading includes facial hair under the sealing surface. Fit-test procedures still cite the 2002 edition of CSA Z94.4 while selection and seal checks cite the 2018 edition.
- Legal status
- in force
- Source check
- Nov 11, 2026
- Topic
- Respiratory protection
What changed
Previous requirement
Former s. 8.39 required that nothing intrude between the facepiece and the face, except specialty eyewear approved by the Board for positive pressure full facepiece respirators, and that a worker be clean shaven where the respirator seals with the face. Standard references in ss. 8.13, 8.33, 8.41, 8.44, 8.45 and 31.26 were updated on April 1, 2026; the prior editions were not confirmed here.
New requirement or current position
Section 8.39 now defines a tight-fitting respirator and states that nothing may be permitted to interfere with the seal. The clean-shaven sentence is removed. Sections 8.40 and 8.41 now use the defined term; the existing fit-test triggers (before first use, at least annually, after facepiece or relevant physical changes) are unchanged, and s. 8.40 still cites CAN/CSA-Z94.4-02 for fit-test procedures. The former specialty-eyewear exception does not appear in the new s. 8.39. Sections 8.33 (selection) and 8.41 (user seal check) cite CAN/CSA-Z94.4-18.
Who it affects
- Workplaces using tight-fitting respirators
- Silica and dust control programs
- Welding
- Wildfire smoke programs
Dates and milestones
Commencement and compliance dates can differ. Read the conditions beside each date, including any stay or local adoption requirement.
- Announcement or publication
- Not established or not applicable
- Recorded effective date
- Nov 6, 2026
Respirator and safety headgear standard references in ss. 8.13, 8.33, 8.41, 8.44, 8.45 and 31.26
B.C. Reg. 229/2025 amendments in force.
Face seal, fit test and user seal check provisions, ss. 8.39 to 8.41
B.C. Reg. 135/2026 in force under Board decision 2026/07/09-06.
What this could mean for your IH program
Advisory interpretation: Update respirator program wording to the tight-fitting respirator definition and keep treating facial hair at the seal as interference. Check that fit-test and seal-check procedures cite the editions named in each section.
Confirm applicability with a qualified practitioner before changing your program.
Questions and qualifications
- The text of B.C. Reg. 135/2026 itself was not found on BC Laws. The Cumulative B.C. Regulations Bulletin 2026 lists it as deposited July 20, 2026, effective November 6, 2026. Before and after wording comes from the BC Laws consolidation current to October 1, 2026 and WorkSafeBC's current Part 8 page.
- WorkSafeBC's Part 8 page prints the amendment note as B.C. Reg. 135/2006 with a November 6, 2026 effective date; the update notice says 135/2026. Treated as a typo.
- Proposed guideline G8.39 on effective seals for tight-fitting respirators is in a preliminary comment period ending November 17, 2026. It is guidance and has no legal effect until finalized.
- Mines Act operations follow the Health, Safety and Reclamation Code and are outside this record.
Source evidence
- OHS Regulation: Respirator face seal requirements
WorkSafeBC · Update notice dated November 6, 2026
B.C. Reg. 135/2026 amends ss. 8.39 to 8.41, in force November 6, 2026.
- BOD Decision 2026/07/09-06: Amendments to OHSR Part 8, face seal
WorkSafeBC · Decision summary
Board approved the Part 8 face seal amendments; they come into effect November 6, 2026.
- Amendments related to respirator face seals now in effect
WorkSafeBC · Announcement, November 2026
Describes the new defined term tight-fitting respirator and states the amendments do not introduce new regulatory requirements.
- OHS Regulation Part 8: Personal Protective Clothing and Equipment
WorkSafeBC · ss. 8.13, 8.33, 8.39 to 8.41, 8.44, 8.45 and amendment notes
Current s. 8.39 holds the definition and the seal-interference duty. Section 8.40 cites CAN/CSA-Z94.4-02; ss. 8.33 and 8.41 cite CAN/CSA-Z94.4-18.
- Occupational Health and Safety Regulation, B.C. Reg. 296/97
BC Laws, King's Printer for British Columbia · Former s. 8.39(1) and (2), consolidation current to October 1, 2026
Pre-amendment text required a worker to be clean shaven where the respirator seals with the face.
- OHS Regulation: Standards for respirators and safety headgear
WorkSafeBC · Update notice dated April 1, 2026; sections listed
B.C. Reg. 229/2025 updated standard references in ss. 8.13, 8.33, 8.41, 8.44, 8.45 and 31.26 from April 1, 2026.
Managing your IH program
Explore how LEAP IH supports industrial hygiene data management and risk assessment.
Explore LEAP IHSee a missing update or a correction? Contact APT with this page and the official source.