Regulatory trackerCoverage and methodology
All findings
United States · Federal: MSHAProposed

MSHA proposes revisions to the stayed 2024 silica rule

The U.S. Mine Safety and Health Administration proposed changes to the stayed 2024 silica rule, with a Federal Register publication date of November 12, 2026. The proposal would change how often operators sample, apply a 21 percent error factor before finding an exceedance, adopt OSHA's respiratory protection standard and revise medical surveillance, while keeping the 50 µg/m³ PEL and 25 µg/m³ action level.

Scope to keep in mind

These changes are proposed and set no new compliance date. Comments are due January 11, 2027, and the 2024 rule's deadlines remain stayed under a court order described in agency notices.

Legal status
Proposed; no final rule verified
Source check
Nov 18, 2026
Topic
Respirable crystalline silica

What changed

Previous requirement

2024 rule (US-MSHA-SILICA-2024) requires initial and quarterly sampling, periodic evaluations every 6 months with post-evaluation sampling, a written respiratory protection program under ASTM F3387-19 and specified medical surveillance. Its compliance deadlines are stayed by the Eighth Circuit and existing mine standards remain enforced.

New requirement or current position

Proposed: sampling as frequently as necessary for miners reasonably expected at or above the action level, replacing quarterly and post-evaluation sampling (60.12(a)(2)); a 21 percent error factor applied to MSHA and operator samples before finding exposure above the PEL or at or above the action level (60.12(d)(3)); PEL citations based only on a single full-shift MSHA sample (60.12(d)(4)); respirators made available at or above the action level until sampling is below it, and operator samples above the PEL reported immediately to the District Manager (60.12(a)(3)-(4)); rotation of miners barred as a corrective action under 60.13 when exposure is above the PEL, narrowing the 2024 text that barred rotation as a method of compliance generally (60.11(b)); 29 CFR 1910.134 adopted by reference in place of ASTM F3387-19, with stated exclusions (56.5005T, 57.5005T, 60.14, 72.710); revised medical surveillance, including mandatory exams within 60 days for miners exposed above the PEL on an MSHA sample unless examined in the last 2 years (60.15); sampling and corrective-action records kept at least 5 years (60.16).

Who it affects

  • Mining
  • Aggregates
  • Metal/nonmetal mines
  • Coal mines
  • Industrial minerals

Dates and milestones

Commencement and compliance dates can differ. Read the conditions beside each date, including any stay or local adoption requirement.

Announcement or publication
Nov 12, 2026
Recorded effective date
Not established or not applicable
Dec 15, 2026

Interested parties

Virtual public hearing, continuing December 16, 2026 if needed. NOT an employer compliance deadline.

Jan 11, 2027

Interested commenters

Written comment deadline (received or postmarked by midnight Eastern Time). NOT an employer compliance deadline.

Not established or not applicable

Compliance date for proposed changes

Not proposed. The amendatory text does not revise 30 CFR 60.1, and the 2024 rule's compliance deadlines remain stayed.

What this could mean for your IH program

Advisory interpretation: Keep proposed sampling, error-factor and respirator changes separate from current mine obligations. The proposal leaves the 2024 limit values unchanged and sets no new compliance date. The 21 percent error factor is a proposed compliance-determination adjustment and must not be applied to current results or shown as a limit.

Confirm applicability with a qualified practitioner before changing your program.

Questions and qualifications

  • Pinpoints were checked against the published GovInfo PDF on November 18, 2026. A November 17, 2026 correction (91 FR 73726) revised the proposed 71.700(a) amendment.
  • Court status (Eighth Circuit stay of April 11, 2025, continuing) rests on MSHA's own account in this proposal and earlier notices. The Eighth Circuit docket was not accessed (PACER login required).
  • The 50 µg/m³ PEL and 25 µg/m³ action level are not entered in numerical_limits here; they are recorded as finalized, stayed values in US-MSHA-SILICA-2024.
  • The regulatory impact analysis and parts of the section-by-section discussion were not fully reviewed. The final rule may differ from the proposal.
  • MSHA's silica rulemaking web page does not mention the stay or this proposal and should not be used for current status.

Source evidence

  1. Respirable Crystalline Silica and Respiratory Protection: proposed rule

    MSHA / Federal Register · 91 FR 73062; Summary, Dates, Addresses; FR Doc. 2026-23048

    Proposed rule, request for comments and notice of hearing under RIN 1219-AC22, Docket MSHA-2026-0200. Filed for public inspection November 10, 2026 at 8:45 a.m.; Federal Register publication date November 12, 2026. Comments due January 11, 2027; virtual hearing December 15, 2026, continuing December 16 if needed.

  2. Respirable Crystalline Silica and Respiratory Protection: full text

    MSHA / Federal Register · 91 FR 73063 (section I); 91 FR 73064 (II.B Regulatory History); 91 FR 73067-73073 (IV.A.2 sampling); 91 FR 73074 and 73082 (respiratory protection); 91 FR 73076-73077 (medical surveillance); 91 FR 73079 (5005T delay); 91 FR 73130-73132 (regulatory text)

    MSHA does not propose changing the 50 µg/m³ PEL or 25 µg/m³ action level (full-shift, 8-hour TWA). Proposed 60.12(d)(3) applies a 21 percent error factor to MSHA and operator samples; 60.12(d)(4) bases PEL citations on a single full-shift MSHA sample. Sampling would be required as frequently as necessary for miners reasonably expected at or above the action level. 29 CFR 1910.134 would be adopted by reference in place of ASTM F3387-19. The Eighth Circuit stay of April 11, 2025 continues and MSHA continues to temporarily pause enforcement. Section 60.1 compliance dates are not amended.

  3. Respirable Crystalline Silica and Respiratory Protection (published PDF)

    MSHA / Federal Register (GovInfo) · 91 FR 73062; FR Doc. 2026-23048

    Published proposal; page locators match the public-inspection text used for this record.

  4. Respirable Crystalline Silica and Respiratory Protection; correction

    MSHA / Federal Register · 91 FR 73726; FR Doc. 2026-23390, November 17, 2026

    Corrects the proposed conforming amendment to 30 CFR 71.700(a) (threshold limit values at surface coal work areas).

  5. Silica: delay of effective date of conforming amendments

    MSHA / Federal Register · 91 FR 17143-17144; Dates; Background; Indefinite Delay

    April 11, 2025 Eighth Circuit stay covers compliance deadlines. April 6, 2026 notice indefinitely delays conforming amendments; existing 56.5001, 56.5005, 57.5001 and 57.5005 remain enforced.

Managing your IH program

Explore how LEAP IH supports industrial hygiene data management and risk assessment.

Explore LEAP IH

See a missing update or a correction? Contact APT with this page and the official source.