MSHA removes outdated diesel particulate limit text for underground metal and nonmetal mines
A U.S. Mine Safety and Health Administration final rule effective December 14, 2026 removes outdated diesel particulate limit text from the underground metal and nonmetal mine standard. The 160 µg/m³ total carbon personal exposure limit stays the same.
The rule creates no new monitoring or control duty. The removed 308 µg/m³ elemental carbon and 350 µg/m³ total carbon values are historical.
- Legal status
- adopted not yet in force
- Source check
- Nov 18, 2026
- Topic
- Diesel particulate matter
What changed
Previous requirement
30 CFR 57.5060(a) and (b)(1)-(b)(2) still carried superseded values (interim 308 µg/m³ elemental carbon; 308 µg/m³ elemental carbon effective May 20, 2006; 350 µg/m³ total carbon effective January 20, 2007), alongside (b)(3) setting 160 µg/m³ total carbon effective May 20, 2008.
New requirement or current position
Paragraphs (a), (b)(1) and (b)(2) are removed and reserved and (b)(3) is reworded. The personal exposure limit remains 160 µg/m³ total carbon as an average eight-hour equivalent full-shift airborne concentration. Paragraph (c) special-extension provisions are unchanged.
Who it affects
- Underground metal/nonmetal mines
Dates and milestones
Commencement and compliance dates can differ. Read the conditions beside each date, including any stay or local adoption requirement.
- Announcement or publication
- Nov 12, 2026
- Recorded effective date
- Dec 14, 2026
Selected exposure values
These values need the scope, limit type and averaging period shown below. A proposed or advisory value is not a binding limit.
Diesel particulate matter (total carbon)
160 µg/m³| Averaging period | Average eight-hour equivalent full-shift airborne concentration |
|---|---|
| Limit type | Personal exposure limit; in force before and after this rule |
| Scope | Underground metal and nonmetal miners, 30 CFR 57.5060(b)(3) |
What this could mean for your IH program
Advisory interpretation: No change to monitoring targets is required by this rule. Remove any remaining references to the 308 µg/m³ elemental carbon or 350 µg/m³ total carbon values as current limits; they are historical.
Confirm applicability with a qualified practitioner before changing your program.
Questions and qualifications
- Pinpoints were checked on November 11, 2026 against the public-inspection text for the November 12, 2026 issue. The GovInfo PDF of the November 12 issue (FR Doc. 2026-23050) was live on November 18, 2026; pinpoints were not re-checked against it.
- A separate MSHA final rule (FR Doc. 2026-12792, 91 FR 38280, effective July 27, 2026) removed outdated effective-date text for diesel equipment emission limits in underground coal mines under 30 CFR part 72. Those are equipment limits, not personal exposure limits, and are not encoded here.
Source evidence
- Improving and Eliminating Regulations: Limit on Exposure to Diesel Particulate Matter in Underground Metal and Nonmetal Mines
MSHA / Federal Register · 91 FR 72781; Dates; FR Doc. 2026-23050; RIN 1219-AC10; Docket MSHA-2025-0079
Final rule with Federal Register publication date November 12, 2026 (filed for public inspection November 10, 2026); effective December 14, 2026. Follows the July 1, 2025 proposal at 90 FR 28403.
- DPM limit rule: full text
MSHA / Federal Register · 91 FR 72781-72782 (I Background; II Discussion); 91 FR 72784 (amendatory instruction 2, revised 57.5060(b)(3))
MSHA published a notice of enforcement of the final DPM PEL of 160 µg/m³ total carbon on May 20, 2008 (73 FR 29058). The rule removes and reserves 57.5060(a), (b)(1) and (b)(2) and states the change has no safety, burden or cost implications.
Managing your IH program
Explore how LEAP IH supports industrial hygiene data management and risk assessment.
Explore LEAP IHSee a missing update or a correction? Contact APT with this page and the official source.